Vac; Demo Mode; Manual Cooking; Diagnostic Mode - TurboChef i5 Owner's Manual

VAC YES/NO:
When VAC is set to YES the incoming voltage will be
displayed on the Info screen. This is set by the factory
and should not be changed.
Demo Mode YES/NO:
Demo Mode is a feature used to demonstrate the cook-
ing features of the oven without turning on the heaters
or microwave system. Demo Mode must be set to NO
during regular operation.
Manual Cooking YES/NO:
When Manual Cooking is set to YES, the operator can
cook items "on the fly." See page 14 for more details.
Diagnostic Mode YES/NO:
Diagnostic Mode allows the operator to view and test
oven components. This mode should only be used by
qualified service technicians, unless otherwise instruct-
ed by TurboChef.
F2 Bypass YES/NO:
The F2 alarm indicates the oven temperature is too
low. YES means the oven will not terminate a cook
cycle when an F2 alarm is encountered. The oven will
still log the fault condition. NO means the oven will
function as it normally would; i.e., when an F2 alarm is
discovered during a cook cycle, the oven will terminate
the cook cycle.
Info Mode: Settings Screen
From the Information or Counters screen, touch
"Login" to access the Settings screen. When
prompted, input the password
touch "ENTER."
From the settings screen, set:

- Temperature

- Language

- WiFi Network

- Volume

- Date

- Time

- Auto On
- Auto Off
Temperature:
The temperature measurement setting is configured at
the factory. Touch °F (Fahrenheit) or °C (Celsius) to
change the temperature measurement settings.
Language:
The default language is English. To change to another
language, touch "Language: English" and then touch
the preferred language and touch "ENTER." The
available languages are:
- French
- German
- Polish
- Portuguese
- Russian
- Spanish
The available languages may also be:
- Chinese
- Korean
- Japanese
9 4 2 8 and then
17