Table of Contents
Advertisement
Operation Instruction
Computer system requirements for using the Speco Remote program are:
Operating System: Microsoft
®
Windows
Vista x86 (32 Bit) (Service Pack 1), Microsoft
CPU: Intel Pentium III (Celeron) 600MHz or faster
RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the Speco Remote program by entering
the following information in the address field.
"http://IP address:12088" (The DVR IP address and the Speco Remote port number
–
(default: 12088) set in the Network setup screen (Speco Remote tab))
Or, "http://DDNS.SPECOTECH.NET/YOURNAME" (The DVRNS server address and the DVR name
–
registered on the DVRNS server)
NOTE: You will need to get the appropriate IP address for the DVR you want to connect
to and the Speco Remote port number from your network administrator.
NOTE: Speco Remote only works with Microsoft Internet Explorer and will NOT
Work with other browsers such as Google Chrome, Mozilla, Firefox, etc..
NOTE: Do NOT close the LOGIN window during the Speco Remote operation, otherwise,
it will cause a script error when switching between Web monitoring and Web search modes
and running the Speco Remote program again will be required.
NOTE: When running the updated Speco Remote for the first time, Internet Explorer might
occasionally load the information of the previous version. In this case, delete the temporary
internet files by selecting Tools
Remote again.
NOTE: There might be a problem that the bottom of Speco Remote page is cropped due
to the address or status bars in Microsoft Internet Explorer 7.0. In this situation, it is
recommended that websites open windows without address or status bars by changing
the internet setting. (Go to the Tools
level... button
Select Enable for the Allow websites to open windows without address
or status bars option)
NOTE: When running Speco Remote in the Microsoft Windows Vista or higher operating
system, it is recommended to start Internet Explorer with elevated administrator permissions.
Click the right mouse button on the Internet Explorer icon and select the Run as administrator
option from the context menu. Otherwise, some functions of Speco Remote might be limited.
15
®
®
Windows
XP x86 (32 Bit) (Service Pack 3), Microsoft
Select between the Remote Watch (Web monitoring)
and Remote Search (Web search) modes. Entering
ID and PASSWORD and clicking the [ LOGIN] button
logs in using the selected mode.
Internet Options
Internet Options
®
®
Windows
7 x86 (32 Bit)
General tab, and then run Speco
Security tab
Click the Custom
®
Advertisement
Table of Contents
