Inserting an MMC/SD Card
Your camera has 16 MB of internal memory. However, optional SD/MMC cards
provide removable, reusable storage for pictures and videos.
CAUTION:
The card should only be inserted as explained below. If
inserted incorrectly, the door won't close, and forcing it
may damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
Notched
corner
To remove the card, push it in, then release it. When the card is partially
ejected, pull it out.
See
page 100
for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products. See www.kodak.com/go/cx6230accessories.
Chapter 1
To insert an SD/MMC card:
1
Turn off the camera.
2
Open the card door.
3
Orient the card as shown.
4
Push the card into the slot to seat the
connector.
5
Close the door.
11