Panasonic KX-FLB881 Operating Instructions Manual page 34

Flatbed laser all-in-one
Table of Contents

Advertisement

5. Copier
Example: 150% enlarged copy
Using the scanner glass (1):
Original document
1
Using the auto document feeder:
Original document
Example: 70% reduced copy
Using the scanner glass (1):
Original document
1
Using the auto document feeder:
Original document
34
5.2.2 To copy 2-sided documents onto 1
page (Quick ID copy feature) (Scanner
Enlarged copy
glass only)
You can make copies of both sides of 2-sided documents
and print them on the same side of paper. The
documents will not be reduced to fit the recording paper,
so this feature is useful for copying small sized
documents such as business cards.
1
Enlarged copy
2
3
4
Reduced copy
5
6
7
Reduced copy
Original document
"2 in 1"
"4 in 1"
Set the original (page 17).
L To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
L The scanning area changes according to the
selected setting in step 3. See the following table
for details. The shaded area will be scanned.
Press {PAGE LAYOUT} repeatedly to select "QUIK
ID COPY". i {SET}
Press {V} or {^} repeatedly to select the number of
original documents from "2 in 1", "4 in 1" or "8
in 1". i {SET}
Press {V} or {^} repeatedly to select the page layout
from "LANDSCAPE" or "PORTRAIT". i {SET}
If necessary, enter the number of copies (up to 99).
i {START}
L The unit will scan 1 page.
To continue scanning, place the next document on
the scanner glass and press {SET}. Repeat this until
all the documents are scanned.
L The unit will start copying.
L You can press {START} anytime to start copying.
After you finish copying, press {STOP} to reset this
feature.
Page layout
"LANDSCAPE"
"PORTRAIT"
"LANDSCAPE"
"PORTRAIT"

Advertisement

Table of Contents
loading

Table of Contents