Panasonic KX-FLB881 Operating Instructions Manual page 14

1. Introduction and Installation
3
Before loading a stack of paper, fan the paper to
prevent paper jams.
4
Load the paper, print-side up (1).
Important:
L Push and lock the plate (2) in the paper input
tray, if it is lifted.
1
L Make sure that the recording paper guides (1)
are at the paper size mark and the recording
paper is under the paper limit mark (2). The
paper should not be loaded over the snubbers
(3).
3
2
3
14
2
1
1
For assistance, please visit http://www.panasonic.com/help
5
Insert the paper input tray into the unit.
Note:
L If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
L If the paper input tray does not close, the plate in the
paper input tray may be lifted. Push the paper and
make sure that the paper is laid flat in the paper input
tray.
Caution for the paper input tray
L Do not drop the paper input tray.
L Hold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 2 kg (4.4 lb.) when the
recording paper is fully installed.
Approx. 2 kg (4.4 lb.)