Panasonic KX-FLB881 Operating Instructions Manual page 27

To print on labels
Use labels designed for laser printing. We recommend
the following:
®
Avery
5160/5161/5162/5163/5164/5165/5167/5168
®
XEROX
LWH100/LWH110/LWH120/LWH130/LWH140
L Use the manual input tray to print labels.
L Load label sheets one page at a time for printing,
print-side down.
L Printed label will be stacked on the upper output
tray.
L Remove each label after printing.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or separated
from the backing sheet.
– Any sheet of labels that has spaces in it where
some of the labels have been removed.
– Labels that do not completely cover the backing
sheet as follows.
To print on envelopes
Use envelopes designed for laser printing. We
recommend the following:
– High quality envelopes of 90 g/m
– Envelopes that have thin, sharply creased leading
edges,
– Envelopes that have diagonal seams, and
– Envelopes with a moisture content of 4% to 6% by
weight.
L Use the manual input tray to print envelopes.
2
(24 lb.) paper,
L You can load 1 envelope of 90 g/m
at a time for printing, print-side down (1).
L Printed envelope will be stacked on the upper
output tray.
L Remove each envelope after printing.
Note:
L Wrinkles and waving may occur in some cases, even
if high quality envelopes are used.
L Avoid printing in high humidity. High humidity may
cause the envelope to curl or seal the envelope.
L Store envelopes away from moisture and humidity,
where they can lay flat and their edges will not be
bent or damaged.
Do not use envelopes with any of the following
characteristics (using these may result in paper
jams):
L Irregularly shaped envelopes
L Envelopes with curls, wrinkles, nicks, twists, dog-
ears or other damage
L Envelopes with side seam construction
L Highly textured envelopes, or envelopes with
extremely shiny surfaces
L Envelopes that seal by removing a peel-off strip
L Envelopes with more than one flap to be sealed
L Self-adhesive envelopes
L Envelopes that are baggy or not sharply creased
L Embossed envelopes
L Envelopes that have previously been printed on
L Envelopes that include cotton and/or fiber material
Side seam Peel-off strip
construction
Twisted
3. Printer
2
(24 lb.) paper
1
Multiple flaps
Curled Bent-edged
27