Volvo 760 GLE Turbo 1986 Manual page 122

1986 Volvo 760 GLE, Turbo
Valve clearance cold engine
inlet
exhaust
All specifications are subject to change without notice.
Engine (760 Turbo)
Liquid-cooled, gasoline, 4-cylinder in-line engine. Cast-iron cylinder block with cylinders bored directly
in block. Aluminum-alloy cylinder head with single overhead camshaft and separate intake and outlet
channels. Engine lubrication is provided by a gear pump driven from the crankshaft. Full-flow type oil
filter. Exhaust emission control accomplished by fuel injection, Lambda-sond
converter. Exhaust-gas-driven turbo-compressor with intercooler.
Type designation
Output (SAEJ 1349)
Max. torque (SAEJ 1349) at rpm 187 ft. lbs. (253 Nm) at 2900 rpm
Number of cylinders
Bore
Stroke
Displacement
Compression ratio
Valve clearance cold engine
inlet
exhaust
All specifications are subject to change without notice.
pg. 116 Specifications
760 GLE (Engine B28F)
Cooling System
Type - Positive pressure, closed system
Thermostat-begins to open at . . . .196-200°F(91-93°C)
-fully open at . . . .215°F(97°C)
Coolant: Volvo Coolant type C (blue-green)
Capacity: 10.6 qts(10 litres)
file:///K|/ownersdocs/1986/1986_760_GLE_Turbo/86760_08.htm (5 of 12)12/30/2006 7:52:39 AM
0.004-0.06" (0.10-0.15 mm)
0.010-0.012" (0.25-0.30 mm)
Volvo B230F-Turbo
160 hp at 5300 rpm (119 kW at 88 rps)
4
3.78" (96 mm)
3.15" (80 mm)
2.32 litres
8.7:1
Checking Adjusting
0.014-0.018"
(0.35-0.45 mm) (0.40-0.45 mm)
0.014-0.018"
(0.35-0.45 mm) (0.40-0.45 mm)
TM
system and catalytic