Kodak 5.1 Extended User Manual page 14

Kodak all in one printer user manual
Hide thumbs Also See for 5.1:
Table of Contents

Advertisement

Networking Your Printer
8
4. If the name of your network is:
Listed
Press
to select your
network, then press OK
5. If your network has security enabled, use the LCD keyboard (see
keyboard, page
10) to enter your security string.
6. When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO5.1+1133).
7. If you haven't installed the KODAK All-in-One Printer Software:
a. Go to
www.kodak.com/go/aiodownloads.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer's operating system.
c. Follow the on-screen instructions.
www.kodak.com/go/aiosupport
Not listed
Make sure your wireless router is turned on and
within range. If your wireless router does not
.
broadcast its SSID (network name):
to select Unlisted Network, then press
1. Press
OK.
2. Use the LCD keyboard (see
keyboard, page
3. Select WEP or WPA/WPA2 as required for your
network's security setup, then press OK.
NOTE: If the name of your network is still not listed,
or your want to change your network, press
to select Rescan for Wireless Networks ,
then press OK .
Using the LCD
10) to enter your network name.
Using the LCD

Advertisement

Table of Contents
loading

Table of Contents