Table of Contents
Advertisement
Status lights
Power status light
Wi-Fi status light
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power light
Off
Blinking
On
Power light
Off
Blinks continuously
Blinks intermittently
On
www.kodak.com/go/aiosupport
What it means
• The printer is turned off.
– Press the power button to turn on power.
The printer does not have power.
– Make sure that the power cord is plugged into the back of
the printer and into an electrical outlet, and that the
electrical outlet has power.
The printer is busy.
• Wait for the printer to finish the task.
The printer is ready.
What it means
The Wi-Fi radio is either turned off, or is turned on but not
connected to a wireless network.
The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted, or is too weak to send signals
to and from the printer
To find and connect to an available wireless network within
range, press OK, turn the Wi-Fi radio off, and run the Wi-Fi
Setup Wizard (see
Connecting to a wireless network, page
The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.
KODAK HERO 5.1 All-in-One Printer
6).
99
Advertisement
Table of Contents
