Satellite Radio Operations - Clarion DXZSBSUS8 Owner's Manual

Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Interface Adapter (Mini-Tuner
Included) : CNP2000UC
Clarion cable for CNP2000UC : CNPCLA1
• SIRIUS Satellite Radio Receiver: SIRCL3
• SIRIUS Satellite Translator Adapter:
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by
the following notations:
"XM": for an
XM
Satellite Radio Receiver
"SIRIUS": for
a
SIRIUS Satellite Radio Receiver
Selecting
a
Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting
a
band
1. Press the [MENU] button to select a band.
This changes the reception band as follows:
·XM: XM1 .... XM2 .... XM3 .... XM1 ...
·SIRIUS: SR1 .... SR2 .... SR3 .... SR1 ...
• Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
XM: "LOADING", SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
XM: "- - - CH", SIRIUS: "INVALID CH"
• A channel not covered by your contract:
XM: "UPDATING", SIRIUS: "CALL 888"
<-4
"539-SIRI" (alternated)
• When your contract is expired: "SUB
UPDATE"
Confirming your SIRIUS ID
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select "SID DISP".
3. Press the [UP] or [ON] button.
Your SIRIUS ID will be displayed 6 digits
number.
4. To return to the previous mode, press the
[OPTION] button.
Displaying channel labels
1. Press the [0] button to select the desired
channel label.
Channel Category .... Artist .... Title ....
Radio text Channel...
Channel selection
1. Channels are selected with the [SEEK
PANEL].
*
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode .
• Quick tuning
1. Push the [SEEK PANELjleftward or
rightward and hold in position for 1 second or
longer.
• Step tuning
1. Push the [SEEK PANELjleftward or
rightward.
DXZ585USB
31