Table of Contents
Advertisement
Control Reference Guide
Rear panel (2)
IN CAR MIC
AUDIO IN
GPS-ANT. (OPTION) connector
When the separately sold GPS
module is installed, insert the cable
from the GPS antenna (attached
to the GPS module). During GPS
reception, the signals received will
regularly and automatically set the
recorder clock to GPS time.
LAN connector
Connect a LAN cable (included in the
separately sold Network Cable Kit).
Note:
For details on how to connect a PC
or run PC applications, contact your
supplier.
USB connector
A commercially available USB memory
device can be connected for use as
external memory.
Not all USB memory devices may be
recognized.
Notes:
• To protect the [USB] port, connect
the USB extension cable (included
in the separately sold Cable Kit) to
the recorder before connecting a
commercially available USB memory
device.
• A maximum of two USB memory
devices can be connected when
using a commercially available
USB hub.
12
AUDIO OUT
VIDEO OUT
CONTROL PANEL
CAMERA 2
CAMERA 1
(continued)
GPS-ANT.
(OPTION)
GPIO/SERIAL
• Consult your supplier for help with
connection.
GPIO/SERIAL connector
This connector accepts up to eight
trigger signal inputs and provides
one Rec Tally output and a serial
port. Connect the trigger cable here
(included in the separately sold
Cable Kit).
DC IN connector
(
This connector accepts power from
the vehicle battery.
Connect the power cable here
(included in the separately sold
Cable Kit).
Note:
Do not pull out the power cable
while the recorder is running.
Turning the power off especially
during access (for example, during
recording) may damage the P2 card
or corrupt file management data,
setting information and other data
on the P2 card.
Cable Clamp
Use this clamp to affix video, audio,
camera cables and the power and
USB extension cables included in
the separately sold Cable Kit.
USB
)
Advertisement
Table of Contents
