Table of Contents
Advertisement
Troubleshooting
Recording
Symptom
Cannot start recording.
Recorded data have
become totally or partially
unusable.
50
(continued)
• Is a P2 card inserted?
• Is the P2 card slot cover closed?
• Is there any free space on the P2 card? Check
the remaining space, and upload files to clear
some space.
• Make sure that the write-protect switch of the P2
card is not set to PROTECT.
• Are the [GPIO/SERIAL] connector or recording
trigger criteria set correctly?
• A power outage or power cable (included in the
separately sold Cable Kit) disconnection during
recording may damage the P2 card or corrupt
data on a P2 card. Never turn the power off
while recording to a P2 card.
• Do not insert or remove a P2 card when another
P2 card is being accessed as this may damage
the P2 card or corrupt data on the P2 card.
• Corrupted data may be restorable (see the
Operating Instructions of the Remote Control
Panel).
Remedy
Advertisement
Table of Contents
