Table of Contents
Advertisement
Notes on Handling
Usage
• Do not remove a P2 card while
it is being accessed, as the P2
card may be damaged or the P2
card slot may become disabled.
When the recorder senses a
disabled slot, it may reboot itself
automatically.
• Do not set liquid containers or
small metal objects on the recorder
or P2 cards.
• Do not insert foreign objects into
the openings of any devices.
• Do not attempt to modify the
recorder or P2 cards.
• Do not use the recorder in a place
where it or a P2 card might get wet,
or water might get inside them.
• The recorder is intended to work
only with P2 cards. Do not attempt
to use non-P2 cards, as that could
damage the recorder.
• When inserting a P2 card, make
certain that it is not upside down
or backwards, and do not attempt
to force a bent or damaged P2
card, as that could damage the
card or P2 card slot.
• While the recorder is operating
(and especially recording), do
not disconnect the recorder 's
power cable (included in the
separately sold Cable Kit). Before
disconnecting the power cable,
first stop all operations and turn
the recorder off. Otherwise, the P2
card may be damaged, or recorder
setting files or management data
on the P2 card may be corrupted.
Maintenance
• To clean the recorder, turn the
vehicle's ignition switch to the
LOCK (OFF) position, and keep
the recorder power turned off
(page 18).
• Do not use solvents such as
benzene, thinner or alcohol, as
these can deform the case or
damage the surface finish.
• Use a soft, dry cloth to dust off the
recorder. If severely soiled, wipe it
with a cloth moistened with a weak
solution of mild synthetic detergent
and wrung out, and afterwards
wipe with a dry cloth.
• If using a chemically treated cloth,
follow the instructions provided
with it.
9
Advertisement
Table of Contents
