Table of Contents
Advertisement
0.5fps: Records a freeze image every 2 seconds.
0.4fps: Records a freeze image every 2.5 seconds.
0.3fps: Records a freeze image every 3.3 seconds.
0.2fps: Records a freeze image every 5 seconds.
0.1fps: Records a freeze image every 10 seconds.
The factory default setting is 15fps.
• 30fps is the active selection when the FIELD/FRAME
parameter in the COMMON SETUP menu is set to
FIELD.
• 15fps is the active selection when the FIELD/FRAME
parameter in the COMMON SETUP menu is set to
FIELD or FRAME 3DIM OFF.
2. Select a recording image quality by clicking the pull-
down list.
SUPER FINE: For enhanced sharpness (Compression
Rate 1/6)
FINE: For fine image quality (Compression Rate 1/10)
NORMAL: For normal image quality (Compression Rate
1/16)
EXTENDED: For extended recording quality (Compres-
sion Rate 1/25)
The factory default setting is SUPER FINE.
3. Select a number of the pre-recording images by click-
ing the pulldown list.
0: Disables pre-recording.
4 to maximum: Sets the number of images for pre-
recording.
• The maximum number of the pre-recording is deter-
mined by the setting of FIELD/FRAME and REC QUALI-
TY.
The factory default setting is 15.
4. Select a number of the post-recording images by click-
ing the pulldown list.
4 to 200: Sets the number of images for post-recording.
The factory default setting is 60.
5. Select the recording pattern for post-recording by click-
ing the pulldown list.
OFF: Records the images assigned to group inputs,
including the one that has activated the alarm (the
same as pre-recording).
ALM-ONLY: Records the particular image that has acti-
vated the alarm.
The factory default setting is OFF.
22
6. Click the [SET] button to execute the selections.
7. Click the PROG
SETUP display in the underneath of
the window to return to the previous program number
window.
One Shot Recording (Internal
Timer)
As described before, the One Shot Recording is an event
recording Function reacting to an alarm input.
It records the number of particular images that have acti-
vated the alarm.
These items let you determine the recording parameters for
One Shot Recording assigned in the program number
menu.
(Continued from Program Timer)
Select the recording mode O/S in the program number win-
dow by clicking the pulldown list, then click the [More} but-
ton.
The selected One Shot Recording window as shown in the
figure will appear on the display.
1. Select a recording rate by clicking the pulldown list.
1 - 30fps: Records the selected number of the freeze
image per second.
The factory default setting is 15fps.
• 30fps is the active selection when the FIELD/
FRAME parameter in the COMMON SETUP menu is
set to FIELD.
• 15fps is the active selection when the FIELD/
FRAME parameter in the COMMON SETUP menu is
set to FIELD or FRAME 3DIM OFF.
2. Select a recording image quality by clicking the pull-
down list.
SUPER FINE: For enhanced sharpness (Compression
Rate 1/6)
Advertisement
Table of Contents
