Alarm Recording (Manual Recording); Timer Recording Setup; Program Timer Recording - Panasonic WJ-HDB502 User Manual

Alarm Recording
(Manual Recording)
These items let you set the recording mode in Time Lapse
Recording when an alarm is activated during manual
recording.
1. Select the alarm recording time mode by clicking the
pulldown list.
The parameters are the same as MANUAL REC MODE.
The factory default setting is SF-24H.
2 Select the alarm recording rate by clicking the pulldown
list.
For details refer to REC RATE in this window.
3. Select the alarm recording image quality by clicking the
pulldown list.
For details refer to REC QUALITY in this window.
4. Select the alarm recording duration by clicking the pull-
down list.
OFF: Disables alarm recording.
10S - 6M: Enables alarm recording for between 10 sec-
onds and 6 minutes.
MANUAL: Enables alarm recording while the alarm sig-
nal is received from the ALARM port on the WJ-
HD500 Disk Recorder.
CONTINUE: Enables alarm recording until the REC
STOP is pressed.
The factory default setting is 10S.
5. Select the alarm recording pattern by clicking the pull-
down list.
OFF: Records all input images starting from input 1.
ALM-PRI: Records the alarmed input images preferen-
tially over other video inputs.
ALM-ONLY: Records the particular images that have
activated the alarm.
The factory default setting is OFF.
6. Click the [SET] button to execute the selection.
7. To return to the previous WJ-HD500 SETUP MENU win-
dow, click that display in the window.
18

Timer Recording Setup

The Disk Recorder can record the images triggered by the
internal timer. The internal timer comprises four event times
common to the recording groups, and is programmed in
the setup.
1. Select either parameter by clicking the TIMER pulldown
list in the WJ-HD500 SETUP MENU window.
W/OUT AUDIO: Enables Timer Recording without
audio.
WITH AUDIO: Enables Timer Recording with audio.
The factory default setting is W/OUT AUDIO.
2. Clicking the TIMER display will call up the TIMER REC
SETUP window according to the specified audio func-
tion, as shown in the figure.
3. To return to the previous WJ-HD500 SETUP MENU win-
dow, click the HD500 SETUP MENU in the window.

Program Timer Recording

Internal Program Timer
These items let you set the program timer for each day of
the week.
There are 4 programs timer can be assigned in the window.
1. Select a program timer (PROG1 to PROG4) to be
assigned for a day by clicking the PROGRAM pulldown
list.
It is recommended to assign a program to a weekday, a
weekend or on a daily basis.
Selecting the (—) will disable the program timer.
2. Repeat the above step to assign the program timer for
other days.