4. Select either 1 or 2 for the number of stop bits for RS-
485 communication by clicking the button.
The factory default setting is 1 bit.
5. Select NONE, EVEN or ODD for parity bit for RS-485
communication by clicking the button.
The factory default setting is NONE.
6. Select one of the waiting time in milli-seconds (ms) to
retry for RS-485 communication by clicking the pull-
down list.
OFF
100
The factory default setting is OFF (no retry).
7. Click the [SET] button to execute the selections.
8. To return to the previous NETWORK window, click the
NETWORK display in the underneath of the window.
12
200
400
1000