Hot Spare Registration - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
5.7.5

Hot Spare Registration

Register the hot spare for the failure of a drive.
The following two types of hot spare are available:
Global Hot Spare
•
This is available for any RAID group.
Dedicated Hot Spare
•
This is only available to a specified RAID group.
For a RAID group that contains important data, assign "Dedicated Hot Spare" in order to preferentially use
the hot spare.
■
Global Hot Spare Registration
The procedure to register a Global Hot Spare is as follows:
1
Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the [Component]
screen, click [Drives] in [Category].
The [Drives] screen appears.
Do Not
• Do not uninstall the drives that are installed by default or move them to any other
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
56
P3AM-8462-01ENZ0