Fujitsu ETERNUS DX200F Configuration Manual page 100

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
17
On the [iSCSI Initiator Properties] screen, confirm that [Status] has changed to [Connected].
18
In the same way, repeat
Initiator IP: IP address of the server (B in
Target portal IP: IP address of the ETERNUS DX (D in
Step 11 and later steps for the other target.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Figure 8.1)
Figure 8.1)
100
P3AM-8462-01ENZ0