Raid Group Creation; Figure 5.5 Raid Group Creation; Table 5.1 Raid Group Creation - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
5.7.1

RAID Group Creation

Create RAID groups (groups of drives that configure RAID in the ETERNUS DX) to create volumes.
Create an operation RAID group and a backup RAID group.

Figure 5.5 RAID Group Creation

Operation RAID group (RG0)
1.6TB
1.6TB
RAID1+0 (2+2)

Table 5.1 RAID Group Creation

Usage
Operation RAID group
(copy source)
Backup RAID group
(copy destination)
The procedure to register a RAID group is as follows:
1
On the navigation of the ETERNUS Web GUI screen, click the [RAID Group] tab.
The [RAID Group] screen appears.
Backup RAID group (RG1)
1.6TB
1.6TB
1.6TB
Item
RG0
RG1
Do Not
Do not uninstall the drives that are installed by default or move them to any other
•
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
1.6TB
1.6TB
1.6TB
1.6TB
RAID5 (4+1)
Create mode RAID type
Manual RAID1+0
Manual RAID5
49
Configuration drive
1.6TB SSD ´ 4
1.6TB SSD ´ 5
P3AM-8462-01ENZ0