Unpacking The Server; Setting Up The Floorstand Model - Fujitsu PRIMERGY TX300 S5 Operating Manual

Unpacking the server

4.1 Unpacking the server
V
CAUTION!
Follow the safety instructions in chapter
page 25.
The server must always be lifted or carried by at least two people.
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again.
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the ID card.
Ê Notify your supplier immediately should you discover that the items delivered
do not correspond to the delivery note.
4.2

Setting up the floorstand model

I
If you are not installing a PRIMERGY TX300 S5 floorstand model, skip
this section and continue reading at
model" on page
V
CAUTION!
Please note the safety instructions in
page 25
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see
Ê Set up the server.
V
CAUTION!
– The device must be protected from direct sunlight.
40
42.
section "Unpacking the server" on page
Operating manual
Hardware installation
"Important information" on
section "Installing/removing the rack
chapter "Important information" on
40).
TX300 S5