GE JKP76 Use And Care Manual page 11

LOWER OVEN CONTROL PANEL
NOTE: The controls for the lower oven will not
operate until the digital clock has been set.
01. DISPLAY. Shows the operations you have
selected, the time of day and the cooking or
cleaning status.
NOTE: The time on the microwave display is
shown in minutes and seconds (1:30 is one
minute, 30 seconds). On the lower oven, the time
is shown in hours and minutes (1:30 is one hour,
30 minutes).
02. BAKE. Press this pad to select the bake function.
03. BROIL. Press this pad to select the broil function.
04. PROBE. Use with the temperature probe to allow
precise control of internal food temperature.
05. AUTO SELF CLEAN. Press this pad for the
Self-Cleaning mode.
06. COOK TIME. Use to enter the amount of time
required for timed baking or roasting.
07. STOP TIME. Use when baking or cleaning to
enter the time of day you want oven to turn off.
08. CLOCK. Press this pad to enter the time of day or
check the time of day when the display is showing
other information.
09. TIMER ON/OFF. Lets you time any kitchen
function.
10. START. Must be pressed to start any cooking
or cleaning function.
11. NUMBER PADS. Use to set any function
requiring numbers—for example, the time
of day on the clock, the timer, the oven
temperature, the internal food temperature
and the stopping times for Time Bake and
self-cleaning.
12. CLEAR/OFF. Cancels all programs except
clock and timer. Also stops the oven signal
and stops the self-cleaning cycle.
13. OVEN LIGHT. Press this pad to turn the oven
light on and off.
If "F–and a number" flash on the display,
and the control beeps, this indicates function
error code. Press the CLEAR/OFF pad. Allow
the oven to cool for one hour. Put the oven back
into operation. If function error code repeats,
disconnect the power to the oven and call for service.
FEATURES OF YOUR
LOWER OVEN
1
2 3
BAKE BROIL
COOK STOP
TIME TIME
6 7
3
1 2
6 7 8
11
How to Recall a Setting
If you want to check the setting for any function
(such as Bake or Broil), press the pad and it will
appear briefly.
If you want to change the setting, press the pad
and immediately enter the new setting. Then press
the START pad.
For example, to check a baking time that you
set, press the COOK TIME pad, and the time will
show briefly.
To change the baking time, press the COOK TIME
pad and immediately enter a new time. Then press
the START pad.
To change the time of day, all other functions,
including the timer, must be off.
NOTE: During Recall, the active function is not
affected until you make a change and press the
START pad.
4 5
AUTO SELF
PROBE
CLEAN
TIMER
CLOCK
ON/OFF
8 9 10
START
4 5
12
9 0
CLEAR
OFF
OVEN
13
LIGHT
11