HP OmniBook 2100 Reference Manual page 114

Specifications and Regulatory Information
Hardware Specifications
87/88-key touch-type full-size keyboard.
Keyboard and
Embedded keypad.
Pointing Device
Touch pad.
Universal serial bus (USB).
Input/Output
9-pin, 115,200-bps serial (16550 UART).
25-pin bi-directional ECP/EPP parallel.
Video-out (up to 1024 × 768 × 64K colors) at up to 85-Hz refresh rate.
PS/2 keyboard/mouse.
4-Mbps IrDA-compliant infrared.
Docking connector.
One Type III or two Type II 16-/32-bit PC Card slots.
Expandability
CardBus enabled.
Zoomed video enabled in one slot.
Plug-in module bay for accessory modules.
Full line of optional docking products: port replicator, mini dock, and docking
system.
Microsoft Windows 95, Windows 98, or Windows NT 4.0.
Preinstalled
Advanced Power Management (APM 1.2).
Software
DMI with HP TopTools.
Online documentation.
OmniBook Recovery CD included.
Centralized worldwide BIOS and driver update service.
Windows 95/Windows 98-compatible Plug and Play.
Windows NT 4.0 PC Card Plug-and-Play.
Two-level password protection.
Security Features
Drive lock.
Password for docking eject.
DMI-accessible electronic serial number.
Kensington MicroSaver lock slot.
Operating temperature: 5 to 35 ºC (41 to 95 ºF).
Environmental
Operating humidity: 20 to 90 percent RH (5 to 35 ºC).
Limits
Storage temperature: –20 to 50 ºC (–4 to 122 ºF).
CPU: Intel Mobile Pentium II.
Major ICs
South Bridge: PIIX4E.
Video: NeoMagic NM2160 (NMG4).
Audio: Crystal CS4237B.
CardBus: TI PCI1220.
Keyboard controller: National PC87570.
Super I/O: SMC 769FR.
8-4