Using The Recovery Cd - HP OmniBook 2100 Reference Manual

Important

Using the Recovery CD

You can use the OmniBook Recovery CD to recover an original OmniBook build, or
you can use it to install the HP custom software over a user-installed alternate
operating system.
The Recovery CD provides the OmniBook-specific drivers to configure your custom
system. The drivers are located in these places:
• On the Recovery CD ROM, under \Omnibook\Drivers.
• On the OmniBook hard drive under C:\Omnibook\Drivers.
• On the OmniBook website at
contains the latest updates of software drivers.
The drivers for the retail version of these operating systems, as well as other
operating systems, are located on the OmniBook website. Detailed instructions are
located in the Readme file in OmniBook/Drivers.
The OmniBook Recovery CD includes the following:
README.TXT text file Instructions for using the Recovery CD .
RECOVER\
BOOTDISK For creating your own copy of a boot disk.
OMNIBOOK\
HPUTILS Use this to install the online User's Handbook or to copy the OmniBook Notes
and Support files to the \OmniBook directory on your hard drive.
DRIVERS Use this to manually install individual device drivers for your factory-installed
operating system. The README file in OmniBook\Drivers contains complete
installation instructions. If you need drivers for other operating systems, go to
the OmniBook website at http://www.hp.com/omnibook.
Use this for viewing of the online User's Handbook from the CD. See HPUTILS
MANUALS
above to install the User's Handbook .
6-2
. This website