Access Control - D-Link DSL-500B User Manual

Web Configuration

Access Control

Access Control – Services
Select Management > Access Control > Services. In this
interface, you can enable or disable HTTP, ICMP, SSH, TELNET
and TFTP services. And the LAN and WAN side can have different
configuration.
Note: If the connection is PPPoE PVC, you can view the infor-
mation on WAN side.
Access Control - IP Address
Select Management > Access Control > IP Address. The
Access Control - IP Address page will appear.
If you enable Access Control Mode, the Router permits access
to local management services from IP addresses contained in the
Access Control List.
If you disable Access Control Mode, the system does not validate
IP addresses for incoming packets. The services are the system
applications listed in the Service Control List.
Click Add and the Access Control page will appear. Enter the IP
address of the management station permitted to access the local
management services, and click Save/Apply.
D-Link DSL-500B User Manual 77