D-Link DSL-500B User Manual page 35

Web Configuration
Step 4
Click Next and the IPoA IGMP and WAN function configuration
page will appear.
To use IGMP service on IPoA pvc, check the Enable IGMP
Multicast box.
In the IPoA mode, you can configure the following functions:
Enable NAT
ƒ
Enable Firewall
ƒ
Click Next to continue.
Step 5
Enter the IP Address and Subnet Mask for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address,
and the Subnet Mask. You may also choose to change the default
value of the lease time.
Click Next to continue.
D-Link DSL-500B User Manual 35