Access Control - D-Link DSR-150 User Manual

Section 9 - Maintenance
Path: Maintenance > Management > SNMP > Access Control List
The page lists all the IP addresses of SNMP agents to which the router allows several operations. To edit, delete,
or create a new access control entry:
1. Click Maintenance > Management > SNMP > Access Control List tab.
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add Access Control.
3. Complete the fields from the table below and click Save.
Field
IP Address
Subnet Mask
Community
Access Type
Save
D-Link DSR-Series User Manual

Access Control

Enter the IP Address of the SNMP agent.
Enter the network mask used to determine the list of allowed SNMP managers.
Enter the community string to which the agent belongs. Most agents are configured to listen for
traps in the Public community.
Select Access Type. It will be either read only (ROcommunity) or read-write (RWcommunity).
Click Save to activate your settings.
Description
222