D-Link DSL-500B User Manual page 70

Web Configuration
Routing - Static Route
On this page you can modify the static route settings. You can
query the preset static routes, delete an existing static route, or add
a new static route. By default, the system has no static route infor-
mation.
Click Add and the following page will appear. Enter the destination
network address, subnet mask, gateway AND/OR available WAN
interface, then click Save/Apply to add the entry to the routing
table.
Destination: The IP address to which packets are transmitted.
Subnet Mask: The subnet mask of the destination IP address.
Gateway: The gateway that the packets pass by during trans-
mission.
Interface: The interface that the packets pass through on the
modem.
D-Link DSL-500B User Manual 70