Appendix B - Networking Basics; Check Your Ip Address - D-Link DSL-500B User Manual

Appendix B - Networking Basics

Appendix B - Networking Basics

Check Your IP Address

After you install your new D-Link adapter, the TCP/IP settings,
by default should be set to Obtain an IP address from a DHCP
server automatically. To verify your IP address, please follow the
steps below.
Click Start > Run. In the run box type cmd and click OK. At the
prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some firewall software
programs may block a DHCP request on newly installed adapters.
D-Link DSL-500B User Manual
Networking Basics
82