Configuration Example - Cisco SPA 525G2 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
NOTE
STEP 5
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
scriptURL.xml
fnc=xml;url=http://
fnc
where is the function of the key (an XML script),
where the script is located, and
scriptname
The field displays on the softkey on the phone display screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA 30X or Cisco 50X phone
and 10 characters for a Cisco SPA 525G/525G2 phone. If more characters are
used, the label can be truncated on the phone display.
You can use macro variables in XML URLs. The following macro variables are
supported:
• User ID—UID1, UID2
• Display name—DISPLAYNAME1, DISPLAYNAME2
• Auth ID—AUTHID1, AUTHID2
• Proxy—PROXY1, PROXY2
• MAC Address—MA
• Product Name—PN
• Product Series Number—PSN
• Serial Number—SERIAL_NUMBER
Click Submit All Changes.

Configuration Example

You want to configure the Cisco SPA 525G/525G2 phone with softkey that, when
pressed, dials the Sales Department's extension (200). You want this button to
display on the far lower left of the screen when the phone is idle, when the phone
is off hook, or when the phone is connected on a call. You want the outbound call
(that is going to the speed dial) to originate from the second extension on the
user's phone, not the primary extension.
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
scriptname
;nme=
scriptURL.xml
scriptname
is the name of the script.
3
is the URL
57