Activating Or Deactivating Supplementary Services; Vertical Service Announcement Codes (Cisco Spa 300 And Cisco Spa 500 Series) - Cisco SPA 525G2 Administration Manual

Configuring Regional Parameters and Supplementary Services

Vertical Service Announcement Codes (Cisco SPA 300 and Cisco SPA 500 Series)

NOTE
Vertical Service Announcement Codes (Cisco SPA 300 and
Cisco SPA 500 Series)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide

Activating or Deactivating Supplementary Services

You can disable services handled locally by the phone in one of two ways:
• Delete the star code in the
Regional tab.
• Disable the service in the
Services (Star Codes), page
If a service is enabled in the Phone tab but cleared in the Regional tab, the service
can still be enabled/disabled by the end- user from the phone LCD or the
configuration utility. If a service is disabled, the soft button associated with that
service is hidden on the LCD. Also, any menu item associated with a disabled
service is preceded with an exclamation mark (!).
A supplementary service should be disabled if
• the user has not subscribed for it
or
• the service provider intends to support similar service using other means
than relying on the Cisco IP phone.
The Cisco SPA 300 Series and Cisco SPA 500 Series IP phones support all
services that can be activated on a phone (call forward, do not disturb, and so on).
Vertical service announcement codes apply only when the user dials the
corresponding star code.
Following is an example of how you can use these fields:
<Service Annc Base Number> = 1234
<Service Annc Extension Codes>=
"CWT:00;CWF:01;FAT:02;FAF:05;FBT:03;FBF:05;FNT:04;FNF:05;"
Here CWT: Call waiting service enabled;
CWF: Call waiting service disabled;
FAT: Call forward all service enabled;
FAF: Call forward all service disabled;
FBT: Call forward busy service enabled;
FBF: Call forward busy service disabled;
FNT: Call forward no answer enabled;
FNF: Call forward no answer disabled;
Vertical Service Activation
Phone
tab. See Configuring Supplementary
159.
7
section in the
164