Setting A Wait Time For Connecting To A Network - Canon LBP6230dw Manual

Setting a Wait Time for Connecting to a Network

When a network is designed with multiple switching hubs or bridges in order to provide redundant connectivity, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However, communication
may still be disrupted for a certain time immediately after you change the network, for example by adding a new device. If this type of
problem occurs, set a wait time for connecting the machine to the network.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit].
5
Enter the time to wait before beginning communication with the network, and then click [OK].
Downloaded from ManualsPrinter.com Manuals
[Waiting Time for Connection at Startup].
Starting the Remote UI
0JFC-023