Specifying Ip Addresses For Firewall Rules - Canon LBP6230dw Manual

Specifying IP Addresses for Firewall Rules

You can allow only communication with devices that have the specified IP addresses and reject communication with other devices. You
can also specify settings to reject only communication with devices that have specific IP addresses and allow other communications. You
can specify a single IP address or a range of IP addresses.
Up to 16 IP addresses (or ranges of IP addresses) can be specified for both IPv4 and IPv6.
The communication protocols that can be restricted in this way are TCP, UDP, and ICMP.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Security Settings]
4
Click [Edit] to specify a filter type.
[IPv4 Address: Outbound Filter]
Restrict data sent from the machine to a computer by specifying an IPv4 address.
[IPv4 Address: Inbound Filter]
Restrict data received by the machine from a computer by specifying an IPv4 address.
[IPv6 Address: Outbound Filter]
Downloaded from ManualsPrinter.com Manuals
[IP Address Filter].
Starting the Remote UI
0JFC-054