Printing Results Are Not Satisfactory - Canon LBP6230dw Manual

Printing Results Are Not Satisfactory

Grime inside the machine may affect printing results. First try cleaning the machine.
Smudge Marks Appear on the Bottom Edge of Printouts
Did you print data without margins, all the way to the edge of the page?
This symptom occurs if a margin is set to none in the printer driver. The range that can be printed on this machine
is the range inside a 5 mm margin around the edge of the paper or a 10 mm margin around the edge of envelopes.
Make sure to have margins around the document to print.
[Finishing] tab
Streaks Appear on Printouts
Are you using appropriate paper?
Check the usable paper types, and replace with appropriate paper.
Paper
In the printer driver, change the setting of [Special Print Adjustment A]. The improvement effect is weakest for
[Mode 1] and strongest for [Mode 4]. Try the adjustment starting with [Mode 1].
[Finishing] tab
When you select [Mode 2] or [Mode 4], print quality may be lower for some types of paper (especially thin paper)
and some printing environments (especially environments with high humidity). In that case, select [Mode 1] or
[Mode 3].
When you select a stronger improvement effect, the overall print density becomes lighter. Also, edges may
become less sharp and details may be rougher.
Toner may adhere when you replace the toner cartridge or when you leave the machine without printing for a
long period.
In the printer driver, change the setting of [Special Print Adjustment B]. The remedial effect is weakest for [Mode 1]
and strongest for [Mode 3]. Try the adjustment starting with [Mode 1].
[Finishing] tab
When you select a stronger improvement effect, printing speed becomes slower.
Toner Smudges and Splatters Appear
Downloaded from ManualsPrinter.com Manuals
[Advanced Settings] [Expand Print Region and Print]
[Advanced Settings] [Special Print Adjustment A]
[Advanced Settings] [Special Print Adjustment B]
Cleaning the Machine
[Off]
Select mode
Select mode
0JFC-039