Epson WorkForce 435 User Manual page 74

• Press a one-touch dial button to select one of the first five speed dial/group dial entries,
then press OK. Press the 1 key to enter another number, or press the 2 key to continue with
the selection made.
4. To change any of the fax settings, press
Fax Settings
• Quality: to increase the scanning resolution of the transmitted document.
• Contrast: to change the contrast of the transmitted document.
• Send Fax Later: to specify what time you want to send your fax. (You cannot send
another fax job until the delayed fax has been transmitted or cancelled.)
• Fax Mode: to select Sending or Poll to Receive mode. Use Poll to Receive mode to
receive a fax from another fax machine to which you have dialed (such as a fax
information service).
Press Menu when done selecting the settings.
5. Press the B&W or
To cancel faxing, press
Note:
If you use the group dial list, only B&W is available.
6. Depending on where you placed your original, the following happens:
• If you are faxing with the Automatic Document Feeder, your document is automatically
scanned and faxed.
• If you are faxing from the scanner glass, you see this screen after the first page is scanned:
If you need to fax additional pages, place your original on the scanner glass or in the
Automatic Document Feeder. Then press 1 to continue.
If you do not need to fax another page, press 2. Your document is faxed.
Note:
If the fax number is busy or there is some other connection problem, you see a redialing
screen and the fax number is redialed after one minute. Wait for the redial, or press Redial/
Pause to redial immediately.
When faxing is complete, you see this screen again:
Use Your Telephone to Dial the Number
74
Menu.
Color button to begin scanning your document.
Stop/Clear Settings at any time.