Mercedes-Benz CLA Operator's Manual page 121

Turn signals (halogen headlamps)
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
X
pull out.
Take the bulb out of bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : and turn it clockwise
X
until it engages.
Cornering light function (xenon bulbs)
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and remove it.
Turn bulb holder ; counter-clockwise and
X
pull out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.
Changing the rear bulbs
Opening and closing the side trim pan-
els
View of right-hand side trim panel
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
To open: release right or left side trim
X
panel : at the top and fold it down in the
direction of the arrow.
To close: insert side panel :.
X
Tail lamps
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (
X
Press retaining clips : at the same time in
X
the direction of the arrows.
Carefully remove the bulb holder with the
X
contacted connectors and the bulbs.
Replacing bulbs
page 119).
Y
Z
119