Mercedes-Benz CLA Operator's Manual page 120

Replacing bulbs
118
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : through 90°.
X
Cover ; is released.
Push cover ; down.
X
To install: push cover ; up.
X
Turn rotary knob : through 90°.
X
Cover ; is locked.
Low-beam headlamps (halogen head-
lamps)
Remove the cover in the front wheel hous-
X
ing ( page 118).
Y
Turn housing cover : counter-clockwise
X
and remove it.
Turn bulb holder ; counter-clockwise and
X
pull out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.
Replace the cover in the front wheel hous-
X
ing ( page 118).
Y
High-beam headlamps/daytime run-
ning lamps/parking lamps and stand-
ing lamps (vehicles with halogen head-
lamps)
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and remove it.
Turn bulb ; counter-clockwise and pull
X
out.
Insert the new bulb and engage it to the
X
stop.
Press on housing cover : and turn it to the
X
right.