Function Key Operations; Range Operations; Range 60; Changing A Range - JRC JFC-130 Instruction Manual

3.3

Function Key Operations

Range Operations

< Changing a Range (
(1)Standard range display
PRESET
Manual
STEP
AUTO Range are changed automatically according to changes
in water depth.
(2)VRM EXPAND display, BOTTOM EXPAND display, and BOTTOM
DISCRIMINATION display ranges
All these ranges can be changed only from the main menu. For more details,
see the following pages:
VRM EXPAND display range
BOTTOM EXPAND display range
BOTTOM DISCRIMINATION display ranges
< Varying a Range (PRESET STD RANGE)
While each range value is preset, it may be varied. To vary a range value in
the STANDARD mode, follow these steps:
1.
Press the and
menu.
2.
If the cursor is at any position other than "1.PRESET STD RANGE,"
use the or
press the MARK key.
3.
Using the or
4.
Using the or
5. Repeat steps 3 and 4 to vary other ranges as needed.
6.
Press the MARK key to return to the main menu.
7.
Press the GRAPH key to return to the fishfinding display.
RANGE

key)

RANGE
Reduce the preset range level.
RANGE
RANGE
Increment the preset range level.
Makes the range shallow.
RANGE
RANGE
Deepens the range.
keys at the same time to call up the main
key to move to "1.PRESET STD RANGE" and
key, move to the range to vary.
key, increase or decrease the range value.
page 21
page 22
page 23
1.PRESET STD RANGE
▲ 2.BTM EXP.RANGE
▼ 3.B.DISCRIM RANGE ≫
4.VRM EXP.RANGE
5.STD RANGE MODE
6.BACK COLOR
7.COLOR MODE
8.USER COLOR
9.DISPLAY
10.SET GRAPH
11.UNIT
GRAPH : RETURN TO F/F
MARK : GOTO SUB MENU
Main Menu
▲
▼ RANGE
STEP
MARK : RETURN TO MENU
PRESET STD RANGE
≫ １ ２ ３ ４ ５
10 20 30 40 50
６ ７ ８ ９ １０

RANGE 60

80 100 150 200
１１ １２ １３ １４ １５
250 300 400 500 800
STEP 10
≫ 2 3 4 5 10
10 20 30 40 50
≫ 5 10 15 20 50
PRESET STEP AUTO
NORMAL 1 2 3
NORMAL 1 2 3
≫
≫
≫ DEPTH/ DEPTH/
TEMP BH
≫
PRESET STD RANGE
１ ２ ３ ４ ５
10 20 30 40 50
６ ７ ８ ９ １０
60 80 100 150 200
１１ １２ １３ １４ １５
250 300 400 500 800
10
19
Operation