< Replaying a Recorded Image
You can display a recorded image, which appears in the right-hand side of
the screen. No menus and graphs can be displayed while a recorded image is
being replayed.
To replay a recorded image, follow these steps:
1.
Press the
key to call up the REPLAY PICTURE menu.
PLAY
2.
An image has been recorded at the number marked by an asterisk (*).
SHIFT
Press the
or
▼
3.
Press the
immediately after the display, various information displays at the
lower left corner to represent the status of the image replayed.
Data Window
STD/STD
・・・Display mode
IR-1
・・・Interference suppression level
60.2m
・・・Depth Unit
15.0℃
・・・Water temperature
SPD1/2
・・・Scroll speed
N 35゚48.000' ・・・Latitude (displays as "0" if external input is not used)
E134゚51.000' ・・・Longitude (displays as "0" if external input is not used)
・・・" AUTO" appears only if auto-ranging is used.
AUTO
4.
Press the
key to cancel the replay and return to the regular
PLAY
fishfinding display.
RANGE
key to move to the number of your choosing.
▼
key to replay the image. For about 7 seconds
REPLAY PICTURE
1
2
*
PLAY : RETURN TO F/F
: PLAY BACK PICTURE
REPLAY PICTURE Menu
Operation
51