Setting The Water Temperature Alarm - JRC JFC-130 Instruction Manual

< Setting the Water Temperature Alarm
You can sound an alarm tone when a preset range of water temperature is
reached. Use the TEMP ALARM menu to set a water temperature alarm
range.
Water temperature within a range of 14°F(-10°C) to 122°F
(+50°C) can be set.
To set the water temperature alarm, follow these steps:
1.
Press the key to call up the ALARM menu.
ALM
▲
2.
Press the or
SHIFT RANGE
3.
Press the key to call up the TEMP. ALARM menu.
4. SHIFT
Press the or
▼
▲
5.
Press the or
SHIFT
RANGE
6.
Press the key to move to "LOWER LIMIT."
▼
▲
7.
Press the or
SHIFT RANGE
8.
Press the key to return to the ALARM menu.
9.
Press the key to return to the fishfinding display.
ALM
If a water temperature within the specified range is reached, the audible
alarm sounds. It continues to sound until the water temperature gets out of
the preset range.
To stop the audible alarm before that, press the
The fish school/water temperature mark remains red even after
the audible alarm has stopped.
54
Operation
▲
key to move to "TEMP ALARM."
RANGE
key to move to "UPPER LIM."
▼
▲
key to set an upper limit temperature.
RANGE
▲
key to set a lower limit temperature.
key.
ALARM
▲ FISH ALARM ≫ OFF ON
▼ TEMP ALARM ≫ OFF ON
ALARM : RETURN TO F/F
: GO TO SUB MENU
ALARM Menu
TEMP ALARM
UPPER LIM. LOWER LIM.
▲ 77℉ 59℉
▼
: RETURN TO ALARM MENU
TEMP ALARM