Displaying Menu [Menu]; Up And Down Key Cursor [Cursor] - JRC JFE-400 Instruction Manual

Displaying Menu [MENU]

Displays the menu for setting various functions.

Up and Down Key Cursor [CURSOR]

 When mode is a standard/history mode
・ Depth cursor is displayed according to cursor mode setting (Refer to 4.3 Display Setting-Setting Cursor
Display)
・ When the is touched, the depth cursor is moved to shallow one.
・ When the is touched, the depth cursor is moved to the deep end.
・ The depth of the depth cursor doesn't display below the decimal point at 100m or more.
・ The depth cursor disappears when the range is switched, and the depth cursor exceeds the display range.
In this case, the depth cursor is displayed the under the depth scale again by touching screen.
・ When the depth cursor is displayed, tap it in the echo display area to move the depth cursor to that area.
・ When the key disappears, tap the screen of scale area to redisplay it.
4. Operation
・ Touch and hold an item to select it, the item will turn yellow green.
Items are selected by touch.
・ Select the required item to display the setting menu for that item.
・ When it returns to the normal screen, touch
Tap scale are
4-4
.
Re-display cursor key