Table of Contents
Advertisement
Other
Hints
on
Caring
for Your
Range
Oven
Light
Bulb
Before replacing
bulb, disconnect
power to oven at the main fuse or circuit breaker
panel
Be sure that the entire oven cavity
including
the light bulb is cool before
attempting
to remove.
To replace
light
bulb:
1. Carefully
remove the glass light lens and lens
retainer by removing the two screws in the light
lens retainer using a phillips screwdriver. Note: The
light lens is separate from the light lens retainer.
The two pieces will drop down into your hands
at the same time. Do NOT remove the remaining
two screws.
2. To obtain firm
grasp on bulb, wear
protective
rubber gloves. Remove by turning bulb to the left.
Do not touch a hot oven light bulb with a damp
cloth as bulb will break. Note: If the bulb does
break and you wish to remove it, be certain power
supply is disconnected
and wear protective gloves.
You may contact your authorized Jenn-Air Service
Contractor
for service.
3. Replace bulb with a 40 watt oven-rated
appliance
bulb. Bulb with brass base is recommended
to
prevent fusing of bulb into socket.
4. Place light lens inside of light lens retainer. Hold-
ing the light lens and lens retainer in place, insert
the two screws into the light lens retainer
and
tighten.
Oven
Racks
To remove,
pull forward
to the "stop"
position;
lift up on the front of the rack
and pull out.
41
Advertisement
Table of Contents
