Table of Contents
Advertisement
Broil
To Broil:
1. Place oven rack on the rack position suggested in the chart. Distance from broiling
element depends on foods being prepared. Rack position 40 (offset rack in position
#4) is usually recommended
unless otherwise stated.
2. Touch Broil Pad,
Indicator Word BROIL will flash and Display wil! show three dashes.
3. Turn Set Dial clockwise one click.
Display will show HI.
The oven has a variable broil feature which
means that a lower temperature
can
be selected. Turn the Set Dial counterclockwise
to lower the temperature
in 5 °
increments.
NOTE:
If more than 10 seconds elapses between touching
Broil Pad and turning
the Set Dial, the oven is not set and Display will return to previous Display.
Three seconds after turning dial, the broil element will come on and the Indicator
Words BROIL and ON will remain in the Display. If the variable broil feature was
selected, the Indicator Word ON will cycle with the element.
EXAMPLE:
If at 4 o'clock you set the oven for broil (HI), the Display will show:
. ,
LILI
-'
[]
4. Place food on roasting
pan provided
with oven. Broil element
will preheat in 2
to 3 minutes. After broil element
is red, place food in oven. Oven door MUST
be left open at broil stop position.
5. Touch Cancel Pad to turn off oven when food is cooked.
NOTE: A fan comes on during
the Broil cycle.
If it does not, the oven broil
element will cycle on and off. If the fan does not operate, contact your authorized
Jenn-Air Service Contractor
for repair.
34
Advertisement
Table of Contents
