Door Latch And Oven Light Switch Assembly - Jenn-Air JMW2430D Technical Education

REMOVING THE DOOR LATCH AND OVEN
LIGHT SWITCH ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Open the oven door to expose the vent trim located
above the oven door opening.
Remove four mounting screws and remove the vent.
Locate and remove two Latch Assembly mounting
screws at the front of the assembly.
Picture shown with the Appliance Manager
mounting support removed for clarity
Must clear mounting tab
Push the Latch Assembly back and up to release it
from a mounting tab at the back.
Once removed from the tab, pull the assembly out
the front.
Microwave Combination Wall Ovens
COMPONENT ACCESS
n
4-13