Runco VX-6000d Owner's Operating Manual page 81

Table 4-3 describes the effects of adjusting the primary color hues.
Table 4-3. Effects of Primary Color Hue Adjustments
Primary Color
Red
Yellow
Green
Cyan
Blue
Magenta
• Saturation: This slidebar adjusts the color saturation level – the amount of that color in
a video image. Lower settings produce less saturated colors; a setting of "-30"
removes that color from the image entirely. If the saturation is too high, that color will be
overpowering and unrealistic.
• Intensity: This slidebar adjusts the intensity – also known as luminance – of a given
color.
• Default: To reset ALL ICC settings – Hue, Saturation AND Intensity of all six colors –
for the currently-selected "Picture Memory" preset to their factory-default values, select
Default (directly below the "Intensity" menu item) from the ICC menu. Then, select Yes
to confirm the reset.
To reset only the Hue, Saturation OR Intensity of all six colors for the currently-selected
"Picture Memory" preset to their factory-default values, select Hue, Saturation or
Intensity from the ICC menu and press ENTER. Then, select Default (the last menu
item) from the ICC menu. Then, select Yes to confirm the reset.
Brilliant Color™: Select Brilliant Color™ from the Advanced Picture Adjust menu to
change the BrilliantColor setting. BrilliantColor utilizes a new color-processing algorithm
and system level enhancements to enable higher picture brightness while providing truer,
more vibrant colors. To enable BrilliantColor, set it to On; to disable it, set it to Off.
Video NR: To apply noise reduction to the input signal, select Video NR from the
Advanced Picture Adjust menu. Noise reduction is useful for improving the signal-to-noise
ratio of video signals. Set it to Off, 1, 2 or 3, as needed, keeping in mind that higher
settings (which reduce high frequencies) may also "soften" the image.
MNR: Select MNR from the Picture Adjust menu to reduce or eliminate so-called
"mosquito noise" in MPEG-compressed video signals (digital broadcasts or DVDs). Set it
to Off, 1, 2 or 3, as needed to minimize distortion around the edges of moving objects,
moving artifacts around edges and/or blotchy noise patterns superimposed over the
objects.
Sharpness Enhancement: select Sharpness Enhancement from the Advanced Picture
Adjust menu to apply edge enhancement to images, giving the impression of added
depth. Set it to Off, 1, 2, or 3 as desired.
Runco VX-6000d Owner's Operating Manual
Downloaded From projector-manual.com Runco Manuals
Press to move the color...
Closer to magenta
Closer to red
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Press to move the color...
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
69
Operation