Runco VX-6000d Owner's Operating Manual page 32

Installation
Downloaded From projector-manual.com Runco Manuals
• Do not drop the remote control or expose it to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. If that occurs, move the
DHD Controller away from the fluorescent lamp.
• Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the DHD Controller or projector.
The signal from the remote control can be reflected by walls or
Note
other surfaces.
• If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
• Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the DHD Controller or projector and repeat the
operation.
20 Runco VX-6000d Owner's Operating Manual