Runco VX-6000d Owner's Operating Manual page 28

Controls and Functions
Downloaded From projector-manual.com Runco Manuals
4. POWER ON/OFF
Use these buttons to turn the VX-6000d on or off.
5. ASPECT RATIO
Press this button to go to the aspect ratio menu page (3/7).
6. SOURCE
Press this button to go to the source selection menu page (2/7).
7. MENU
Press this button to go to the DHD Controller OSD menu navigation page (4/7).
8. VIDEO
Press this button to switch to the Composite Video input.
9. COMP.
Press this button to switch to the Component Video input.
10. S-VID 1 / S-VID 2
Press these buttons to switch to the S-Video 1 or S-Video 2 input.
11. HD 1 / HD 2
Press these buttons to switch to the HD/RGB 1 or HD/RGB 2 (RGBHV or YPbPr
component) input.
12. HDMI 1 / HDMI 2
Press these buttons to switch to the HDMI 1 or HDMI 2 input.
13. BACK
Press this button to return to the main menu page (1/7).
14. Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
ANAMORPHIC
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4 x 3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LETTERBOX
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
VIRTUALWIDE
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
15. MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
16 Runco VX-6000d Owner's Operating Manual