Table of Contents
Advertisement
A S SE MB LY ST E P
HARDWARE BAG CONTENTS :
A
Open HARDWARE BAG .
B
With running deck in lowered position, place CONSOLE on upright masts. Align the
brackets that are underneath the console with the top holes of the upright masts.
C
To assemble the LEFT CONSOLE MAST to the CONSOLE, insert 1 BOLT (G), 1 SPRING
WASHER (H) and 1 FLAT WASHER (B) into the 2 holes in the LEFT CONSOLE MAST and
lightly tighten.
D
Gently lift RIGHT side of the CONSOLE to connect the CONSOLE CABLE. Carefully tuck wires
in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.
E
Repeat STEP C above to attach the RIGHT CONSOLE MAST to the CONSOLE.
F
Tighten console bolts completely.
10
BOLT (G)
SPRING WASHER (H)
20 mm
15 mm
Qty: 4
Qty: 4
FLAT WASHER (B)
20 mm
Qty: 4
CONSOLE
CONSOLE CABLES
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
RIGHT CONSOLE MAST
FLAT WASHERS (B)
SPRING WASHERS (H)
BOLTS (G)
* NOTE: Be
careful not to
pinch any
wires while
attaching the
console.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
