Armrests - Invacare rea Bellis User Manual

4.
1.
A
2.
®
REA BELLIS
4. For shaping the form, loosen the Velcro straps,
tighten first where you would like to have a firm
support and follow with the others. Check that
the cover/cushion do not "lock" the straps by the
Velco attachment.
A
Backrest cushions
The three backrest cushions support waist, shoulders
or latheral , and all of them fit on the backrest plate
and the tension adjustable back.
Note that they should as well as the covers for tension
adjustable back cover the upper part of the backrest
frame.
ARMRESTS FLIP-UP
Flip-up "Nice" armrests
1. Armrest height
The height of the armrest can be adjusted by care-
fully pulling the armrest upholstery to one side and
then unscrewing screw (A) with a 5-mm Allen key.
Adjust to the desired height and re-tighten the
screw.
2. Armrest depth
The depth of the armrests is adjusted by loosening
the handwheel (B), adjusting the armrests to the
desired position and then re- tightening.
B
Please ensure that the velcro straps are not too
loose, as this will result in your back coming
into contact with backrest bow (A), and could
result in injury.
17