2/2.
C
3.
D
4.
E
5.
®
REA
BELLIS
Alternative 2:
Loosen the Allen screw (C) by the legrest attach-
ment as shown in the diagram. Adjust to the
desired height and then retighten the screw.
3. Loosen the Rea™r screw (D) on the side of the
tube and adjust the legrest to the desired angle.
Retighten the screw. Repeat this procedure to
adjust the angle of the other legrest.
4. Loosen the frontal screw (E) on the side of the
tube to adjust the depth of the legrest. Tighten
the screw when you have found the desired depth.
Repeat this procedure to adjust the depth of the
other legrest.
5. The angle of the legrests can be adjusted upwards
if required.
15