Assembly - Invacare rea Bellis User Manual

1.
A
B
2.
3a.
10

Assembly

C
A
When you receive your wheelchair, you must fit
the backrest, armrests and legrests onto the chair.
The assembly is simple and does not require any
tools.
1. Backrest
The backrest is fitted onto the wheelchair by
feeding the shafts (A) of the backrest onto the
tubes of the chair (B). Ensure that you push
the backrest down as far as possible. Secure
into place by tightening the knobs (C).
Secure the backrest cushion using the Velcro
strips.
Now check that the backrest is secured
rmly in position!
When using backrest on older models of
Bellis™ wheelchairs an adapter kit is requi-
red!
2. Armrests
Fit the armrests by pushing the two tubes into the
holes on the armrest holder. The armrest is then
pushed down into the attachment (A).
3. Legrests/footrests
The wheelchair can be equipped with either leg-
rests or footrests.
3a. Legrests
Attach the legrests by pushing the tube at the
upper part of the legrests down into the tubes
on the wheelchair. You must angle the legrests
outwards when inserting them.
To avoid the brakehandle and the legrests/foo-
trests running into each other, please always active
the brake before mounting or dismounting the
legrests/footrests.
Lock the legrests by turning them inwards. The
legrests are automatically locked so there is no
risk of them coming off the wheelchair.
®
REA BELLIS